The Weiland Advantage:
- Tough, delamination-proof exterior – We mold our entire door at once without seams
- Cleanable white gel coat – Even graffiti wipes clean
- Void-free construction – Nowhere for bacteria to hide
- Polymer backing behind all hardware – Ready for high traffic openings
- Closed cell polyurethane core – Maximum thermal performance
- Seals that Actually Seal – EPDM gaskets that wrap perimeter without splices
- We Use the Best S/S Hardware Available
Superior Screw Retention
Thicker Layer of Fiberglass
Only Door Molded All at Once
Advanced Composite Construction
4″ thick doors are readily available in standard 3×7′ sizes. Custom sizes are available using traditional construction methods- consult with Weiland.
Premium 25-mil gelcoat is molded into our fiberglass doors, chemically bonding with the underlying fiberglass resins. This exterior protects against corrosion, and provides a highly-cleanable surface. Most customers opt for UV resistant white doors, however gray or custom gel coat colors are available. Consult with Weiland for advice.
Weiland stands apart from all other infit doors on the market, by being the only door molded all at once. The front, back, and sides are formed at once through an advanced close-molded process (Light RTM), meaning that the door is a solid structure of fiberglass. Measuring more than 1/8” inch thick on the face and nearly .375″ thick on the edges, Weiland’s fiberglass exterior is the thickest of any infit door in the industry.
26-ga stucco embossed stainless steel clad frames are standard, and brush stainless is available upon request. The core of our casings is made of HDPE plastic lumber. Jamb depths are built to virtually any size, accommodating any wall type or depth.
Please consult with Weiland on requirements and recommendations.
The core of our infits was engineered using a combination of advanced polymers for maximum screw retention, and premium polyurethane foams for maximum r-value. There are no voids anywhere in the panel, nor any harborage area.
Stainless Steel Vision Panels
Standard sizes are 12×18″ and 10×10″, and can special order any custom size. We provide scratch resistant polycarbonate glazing in most applications (which is much more durable and chemical resistant than standard Lexan), and can also provide insulated, tempered, heated and safety coated glass, depending on the environment. Learn more about glazing options here.
Weiland utilizes the highest quality stainless hinges, latches, and hardware from a variety of the best manufacturers in the USA. The hardware we use on our doors we stock in our warehouse in the event you need to order replacement hardware down the road.